User Guide
ICE D-20 Wireless Broadband Gateway
Table of Contents
Huawei Technologies Proprietary
3-15
III. Restoring the Default Settings
The steps of restoring the factory setting are shown as follows.
1)
Select
Advanced
in the operation navigation area.
2)
Select
Admin
in the operation navigation area.
3) Select
Restore defaults
in the operation navigation area and then click
Restore
to restore the default settings. See Figure 3-15.
Figure 3-15
Restoring the default settings
Note:
After setting D-20 to default settings, you need to re-set the parameters of D-20.
IV. Rebooting D-20
The steps of rebooting D-20 are shown as follows.
1) Select
Advanced
in the operation navigation area.
2) Select
Admin
in the operation navigation area.
3) Select
Reboot
in the operation navigation area and then click
Reboot
to reboot
D-20. See Figure 3-16.
