10
5. Enter the user name and password that are provided by the
network operator in the
User name
and
Password
text boxes.
6. Keep the default settings of other parameters.
7. Click
Submit
.
After completing the preceding configuration steps, you can begin browsing
the Internet.
You only need to perform the preceding operations on a computer once.
The next time you boot up your computer, you can browse the Internet
without performing the same configurations.
2.3.2 Accessing the Network through the PPP Dial-Up
Software on Your Computer
If you select this method for accessing the network, you need to install and
configure the dial-up software on your computer. In addition, you need to
perform dial-up operations on your computer upon each startup. To
configure the HG533 and your computer for the network access, do as
follows:
Step 1
Set the working mode of the HG533 to
Bridge
.
1. In the navigation tree on the left of the web-based configuration
utility, choose
Basic
>
WAN
.
2. Select
Enable
for
WAN connection
.
3. Select
INTERNET
from the
Service list
.
4. Select
Bridge
from the
Connection type
drop-down combo box.
5. Keep the default settings of other parameters.
6. Click
Submit
.
Step 2
Install and configure the PPP dial-up software on your computer.
The PPP dial-up software is pre-installed on certain computer operating
systems. To create a dial-up connection, do as follows (taking the
Windows XP operating system as an example):
1. Choose
Start
>
All Programs
>
Accessories
>
Communications
>
Network Connections
.
