15
6 FAQs
Can I use the HG532t as a DHCP server?
Yes. The HG532t incorporates the DHCP server software.
How can I quickly restore the default settings of the HG532t?
When the HG532t is powered on, press and hold the
Reset
button for 6 or
more seconds, and then release it. The HG532t then automatically restarts
and the default settings are restored.
What can I do if I cannot access the HG532t configuration page?
Step 1
Check the IP address of your computer and ensure that this IP
address is in the same network segment as the HG532t LAN IP
address.
Step 2
Ensure that your Web browser does not use a proxy server.
Step 3
Ensure that you have entered the valid user name and password
used to access the HG532t configuration page.
If the problem persists, restore the default settings of the HG532t.
Does the WPS function have any special requirement on the wireless
encryption settings of the HG532t?
The WPS function can be used only when the WLAN security mode is set to
WPA-PSK
or
WPA2-PSK
. It is recommended that you set the security mode
to
WPA-PSK/WPA2-PSK
.
If my computer fails to connect to a WLAN after I press and hold the WPS
button, what should I do?
Step 1
Ensure that only one computer is connecting to the HG532t
through the WPS function at one time.
Step 2
On the HG532t, ensure that the wireless network function and the
WPS function implemented through the PBC method are enabled.
Step 3
Ensure that the security mode of the WLAN is set to
WPA-PSK
or
WPA2-PSK
. Note that the WPS function of the HG532t is forcibly
disabled if the WEP encryption is used for the WLAN.
Step 4
Check the positions of the HG532t and computer. Ensure that they
are far from electric appliances that generate strong magnetic or
electric fields, such as microwave ovens, refrigerators, and
cordless telephones.
