5
Install the splice protection tube.
Strip the optical fiber to the fiber core and clean.
Strip the pigtail.
Ф
0.25 optical fiber (pigtail)
Ф
0.125 fiber core
Ф
0.125 fiber core
Ф
0.25 optical fiber
(distribution cable)
Splice the tw o fiber cores:
a) Splice the tw o fiber cores w ith fusion splicer.
b) After the splicing is complete and passes the check,
move the splice protection tube to the splicing point for heat
shrinking.
Splice protection tube
Make sure bare fibers are loose after
splicing and fixing so that they do not
snap.
Set tw o splice protection
tubes in each slot
Insert the splice protection tube into the fixing base of the splicing tray to protect the splicing
point. Coiling-store optical fiber according to the pre-stored routing.
3 Splicing the Optical Fiber and Pre-installed Pigtail
Distribution fiber
Pigtail fiber
Tight buffer fiber
Pigtail
40 mm
