Installation Tools
Long measuring tape
Level
Screw drivers
Scissors & Diagonal pliers
Stripping tool
Socket w rench
Gloves
Marker
Φ
10 mm drill bit
Hammer drill
Installation Procedure
Start
End
Drilling Installation Holes
Sealing the Case
Leading in, Stripping, Securing and Coiling the
Distribution Cable
Installing, Splicing Pigtail and Drop Cable
Checking After the Installation
Splicing the Optical Fiber and Pre-installed Pigtail
Installing the Case
Rubber mallet
a
1 Drilling Installation Holes
a
Splicing tool (splicing machine/
incision knife/cleaning agent)
2
a
Drilling Holes on the Wall
Place the FAT against the w all and align it horizontally
using a level. Then, mark the installation holes.
Drill Φ10 mm holes using a hammer drill. After drilling the
holes, clean up the dust using a vacuum cleaner.
Φ10 mm
drill bit
40 mm
a
Level
Wall
Installation holes
Marker
