Huawei ETS2251, User Manual

Page: 63 / 79

1
1
0
0
F
F
W
W
T
T
S
S
e
e
t
t
t
t
i
i
n
n
g
g
s
s
HUAWEI
55
Note:
y
One pressing of <
PAUSE
> (
P
) indicates a delay for 2 seconds. You can
add one or more "P"s during the voice prompt to satisfy the time delay;
y
Up to 32 digits can be input between or before "P"s and the maximum
length of the entire information, including "P"s, is 60 digits.
Hotline Settings
The FWT supports hotline function. That is, in the standby state, the FWT can
automatically dial out a hotline number if you pick up the handset or press
<
HANDFREE
> but do not dial after a while.
After you enter the "Common" interface,
1 Find [
Hotline
], and then press <
OK
> to enter it;
2 Select an option,
y
[
Start Time
]: Set the waiting time for auto-dial. Value range is 2–9 seconds;
y
[
Activation
]: Select to enable or disable the function. Options are "On" and
"Off";
y
[
Number
]: Enter a hotline number;
3 Press <
OK
>.
For example, the start time is set as 5 seconds, the hotline number is "12345678"
and the activation option is "On". If you pick up the handset or press
<
HANDFREE
> but do not dial after 5 seconds, the FWT will automatically dial
out "12345678".
Long-Distance Call Locking
The FWT provides the long-distance call locking function. You can set and
enable the function. When somebody dials a long-distance call number, the FWT
will prompt him to enter the correct password. Otherwise, the long-distance call
cannot be dialed out.
After you enter the "Common" interface,
1 Find [
Long Distance
], and then press <
OK
>;
2 Enter a correct password of 4 digits. By default, it is "0000";
3 Select whether to enable the long-distance call locking function,
y
[
On
]: Enable the function;