Huawei ETS2226 User Manual Download Page 22

Page: 22 / 73

3 Function Description

HUAWEI

Power jack

It is a DC-input power port, used to connect the FWT with the power adapter.

FWT switch

It is used to turn on/off the FWT.

DB9 serial port

You can maintain the FWT through this port.

Display Screen Description

Icons Description

(1) (2) (3) (4)

(6)

(8)

(5)

(7)

(9) (10)

Figure 3-6 Icons on the screen

: Signal strength. The strength of received signal is displayed from weaker to

stronger in four levels from 1 through 4.

: Unread voice messages. This icon disappears when all messages have been

read.

: Unread text messages. This icon disappears when all messages have been

read. The inbox can only hold at most 22 text messages.

: Call privacy mode. This mode can improve the security and privacy of a call.

: Hand-free.

: In mute mode.

: Network not available.

: In power supply mode.

: In alarm mode. The icon is located at the left corner.

Summary of Contents for ETS2226










































































Search results

Summary of Contents for ETS2226

Reviews:

Related manuals for ETS2226

Brands by name

Popular brands

Huawei ETS2226, User Manual

Search results

Summary of Contents for ETS2226

Reviews:

Related manuals for ETS2226

Brands by name

Popular brands