Huawei IP Phone eSpace 7870
User Manual
3 Configuring eSpace 7870
Issue 01 (2012-06-20)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
16
1.
Access the
Features
page.
2.
Select
[DSS Keys]
and press the
OK
key.
3.
Select
[Line keys as DSS keys]
or
[Memory Keys as DSS Keys]
, and press the
OK
key.
4.
Select a key to be configured and press the
OK
key.
5.
Press the soft key
Switch
, select a function, and set parameters based on the function that
you select.
6.
Press the soft key
Save
To set expansion keys, proceed as follows:
1.
Connect an expansion module to eSpace 7870, and press an expansion key to be
configured for about five seconds.
The configuration page is displayed.
2.
Press the soft key
Switch
, select a function, and set parameters based on the function that
you select.
3.
Press the soft key
Save
Settings vary according to the function that you select. Parameters and related settings are similar on the
eSpace 7870 LCD and Web page. For details, see contents in
Table 3-4
and
Table 3-5
.
3.1.10 Setting the Send Key
eSpace 7870 allows you to set a key such as the pound key (#) or star key (*) to the send key.
By default, this function is disabled.
To set the send key, proceed as follows:
1.
Access the
Features
page.
2.
Select
[Key as Send]
and press the
OK
key.
3.
Press the soft key
Switch
, select a key, and set this key to the send key, or disabled this
function.
4.
Press the soft key
Save
.
By default, the pound key (#) and star key (*) are set as eSpace U19xx's service feature codes. If you set
the pound key (#) or star key (*) as the send key, the eSpace U19xx's service feature codes whose last
digit is the pound key (#) or star key (*) will not be available.
3.1.11 Setting the Hot Line
The hot line function works when users pick up the handset or press the speaker key but do
not dial any numbers or hang up within the preset duration.
To set the hot line, proceed as follows:
1.
Access the
Features
page.
2.
Select
[Hot Line]
and press
OK
.
3.
Enter the hot line number and set hot line delay.
4.
Press the soft key
Save
.
