background image

Limited Warranty 

 

Subject  to  the  exclusions  contained  below,  Huawei Technologies  Co., Ltd. (Huawei 
for  short)  warrants  its  access  terminals  ("Products")  to  be  free  from  defects  in 
materials  and  workmanship  under  normal  consumer  usage  for  one  year  from 
the  date  of  purchase  of  the  product  ("Warranty  period").  During  the  warranty 
period, a Huawei authorized service partner shall remedy defects in materials and 
workmanship free of charge. 
Special Notice: 
1. The warranty card shall be applicable only after being stamped by the dealer. 
2. The warranty card must be preserved in good condition and free of any scratch or 

alteration. 

3. To claim such service for defects  that are not included in  the following exclusion 

terms, the  warranty card  and the invoice that records that product serial number 
shall be presented to a Huawei authorized service partner. 

 
 

Exclusions: 
In  any  of  the  following  cases,  the  warranty  card  becomes  unenforceable  or 
inapplicable without prior notice: 
1. The defects are caused by improper handling in transportation and assembly. 
2. The  defects  are  caused  by  the fact that the  product  is  dismantled  or  altered  by 

anyone that is not from a Huawei authorized service partner. 

3. The defects are caused by the fact that the product is used in a harsh environment 

that is not suitable for the operation of the product. 

4. The  defects  are  caused  by  any  force  majeure  including  but  not  limited  to  fire, 

earthquake, lightning, and tsunami. 

5. The defects are caused by the fact that the product is used or handled incorrectly, 

roughly or not as instructed in the applicable User Guide. 

6. The normal wear and tear, including but not limited to the normal wear and tear of 

the shell and the power module, shall not be covered by the limited warranty. 

7. The warranty card is altered or illegible, or the product serial number recorded on 

the  warranty card is inconsistent  with the  actual  one imprinted or labeled  on  the 
product. 

 

In any case that is not covered by this limited warranty or should the warranty expire, 
Huawei shall charge for the service(s) claimed for the products if the product is still 
remediable. Huawei reserves all rights to interpret this limited warranty. 

 

 

Huawei Technologies Co., Ltd. 

Address: Huawei Industrial Base 
Bantian, Longgang 
Shenzhen 518129 
People's Republic of China 
Website: http://www.huawei.com 

Summary of Contents for EG8040 Series















Reviews: