manualshive.com logo in svg

Huawei EchoLife HG550, User Manual, Page: 52 / 61

Share
Download
Huawei EchoLife HG550 User Manual Download Page 52

 

Huawei Technologies Proprietary 

42 

1)  Enter the full path of the firmware file or click 

Browse…

 to 

select the firmware file. 

2) Click 

Upload

 to start loading the firmware file. 

 

If the upload is successful, a message informs you that it 

was successfully loaded. 

 

If the firmware does not load, an error message informs you 

to try the upload again. 

 

Check the file names and attempt to upload again. If the file 

still is not loaded, reboot the device and try again. 

 

  Caution: 

Do not power off HG550 during the firmware upgrade process. 

Otherwise, the configuration in the flash may be damaged. 

 

3.4.4  Save & Reboot 

Click 

Save & Reboot

 of 

Tools

 in the navigation bar to display the 

Save & Reboot

 page. 

Table 3-30 shows the parameter explanation of the 

Save & 

Reboot

 page. 

Table 3-30 Parameters in the 

Save & Reboot

 page 

Item 

Configuration 

Save

 

Select it and then click 

Apply

, system will save the 

current configuration permanently. 

Summary of Contents for EchoLife HG550






























































Reviews:

No comments