manualshive.com logo in svg

Huawei EchoLife HG550, User Manual, Page: 40 / 61

Share
Download
Huawei EchoLife HG550 User Manual Download Page 40

 

Huawei Technologies Proprietary 

30 

Table 3-20 Parameters in the 

Routing Table-add

 page 

Item 

Configuration 

Destination

 

 

IP Address

: Enter the destination IP address. 

 

Netmask

: Enter the subnet mask.

 

Forward packets to

 

Gateway IP address

: If you select it, you will 

need to enter the gateway IP address. All the 
packets of which the destination address is 
identical with the specified IP address will be 
forwarded to gateway. 

 

Interface

: If you select it, you can select an 

interface from the drop-down menu. All the 
packets of which the destination address is 
identical with the specified IP address will be 
forwarded to the interface you select here.

 

 

II. Save 

 

Click 

Apply

 to save the settings in the RAM. 

 

To save this configuration changes permanently, enter the 

Save & Reboot

 page, select 

Save

 and click 

Apply

 to save 

new settings. 

3.3  Advanced 

3.3.1  UPnP 

Click 

UPnP

 of 

Advanced

 in the navigation bar to display the 

UPnP

 page. 

Summary of Contents for EchoLife HG550






























































Reviews:

No comments