Huawei Technologies Proprietary
14
Click
Cancel
to quit configuration without saving the
changes.
Click
Next
to display the
Connection Type
page.
For the parameter explanation of the
Connection Type
page,
see Table 3-2.
Click
Back
to go back to the previous page.
Click
Cancel
to quit configuration without saving the
changes.
Click
Next
to display the
WAN IP
page.
Table 3-4 shows the parameter explanation of the
WAN IP
page.
Table 3-4 Parameters in the
WAN IP
page
Item
Configuration
The Access
Configurator
Option
Check the box to enable the access configuration
option.
Access
Concentrator
Enter the IP address of the access concentrator.
WAN IP Settings
If you select
Obtain an IP address
automatically
, system will obtain an IP address
automatically from remote DHCP server.
If you select use the following IP address, you
will need to enter the IP address provided by
your ISP.
WAN IP Address
Enter the IP address of WAN interface provided by
your ISP.
Enable NAT
You can check the box to enable NAT or leave it
unchanged to disable NAT.
Add Default Route
You can check the box to enable adding default
route or leave it unchanged to disable it.
Click
Back
to go back to the previous page.