Huawei EchoLife ET323 User Manual Download Page 13

Page: 13 / 64

EchoLife ET523 IP Phone User Manual

2 Product Overview

Table 2-3

Technical specifications of the ET523

Item

Specification

Lines

4 direct lines with 7 speed dial keys and up to 11
concurrent calls.

Additional 112 speed dial keys are expanded through
connecting two ET523 EXTs.

SIP 2.0, TCP/UDP/IP, PPPoE, RTP/RTCP, SRTP by
SDES, HTTP, ARP/RARP, ICMP, DNS, DHCP,
NTP/SNTP, TFTP, SIMPLE/PRESENCE protocols.

Supporting multiple SIP accounts and up to 11 media
channels at the same time.

Supporting SIP PUBLISH method (RFC 3903), SIP
Presence package (RFC 3856, 3863) for the use of 7 MFKs
and ET523 EXT, SIP Dialog package (RFC 4235).

Supported protocol

Supporting SIP MESSAGE method (RFC 3428).

Up to 100 incoming IM messages can be stored (drops the
latest IM message).

Display

8 lines ×22 characters; The pixel is 131 ×64.

Function keys



Seven dedicated keys:

MSG

(message),

Hold

TRNF

(transfer),

CONF

(conference),

SPEAKER

SEND

MUTE/DEL



One menu key and four navigation keys



LED indicators that can be on in two colors.

Supporting the upgrade of the NAT-friendly remote
software (through TFTP/HTTP) for deployed devices
including behind the firewall/NAT, auto/manual
provisioning system, GUI interface, and address book.

Supporting Layer 2 (802.1Q, VLAN, 802.1p) and Layer 3
QoS (ToS, DiffServ).

Device management

Supporting the ET523 extension board and diagnostic
mode for keys on ET523 extension board.

Hands-free, handset and headset modes in full duplex.

Advanced DSP.

Dynamic negotiation of codec and voice payload length.

Audio features

Supporting the G.723,1 (6.3K), G.729A/B, G.711 µ/A,
G.726-32K, G.722 (wideband), GSM and iLBC CODECs.

Summary of Contents for EchoLife ET323

































































Search results

Summary of Contents for EchoLife ET323

Reviews:

Related manuals for EchoLife ET323

Brands by name

Popular brands

Huawei EchoLife ET323, User Manual

Search results

Summary of Contents for EchoLife ET323

Reviews:

Related manuals for EchoLife ET323

Brands by name

Popular brands