29
may be deformed and the installation of the EG8020P
may be affected.
Required ST3.5x40 screws are used to install the power
adapter on the standard junction box.
The fixing plate must be installed according to the direction
shown in the above figure.
When fixing the power adapter, do not press the optical fiber.
To route the optical fiber to the product from the outer side of
the 86-type junction box, you do not need to route the optical
fiber through the fixing plate. To prevent the optical fiber from
being pressed, remove the knock-down hole from the shell.
For details, see step 7.
Step 4
Remove the EG8020P shell, and then mount the
main components to the fixing plate and secure
the components using ST2.6x6 screws.
