eAN3810A
Deployment Guide
1 eAN3810A Deployment Guide
Issue 01 (2017-04-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
53
TRANSPORTDEVICENO=0;
//Adding sectors and cell antennas
ADD SECTOREQM:sectorEqmNo=0;
ADD TXSECTORANTENNA:TXSECTORANTENNANO=0,SECTOREQMNO=0,TXBRANCHREF=0;
ADD RXSECTORANTENNA:RXSECTORANTENNANO=0,SECTOREQMNO=0,RXBRANCHREF=0;
ADD TXSECTORANTENNA:TXSECTORANTENNANO=1,SECTOREQMNO=0,TXBRANCHREF=1;
ADD RXSECTORANTENNA:RXSECTORANTENNANO=1,SECTOREQMNO=0,RXBRANCHREF=1;
//Adding cells and set sectors and operators for the cells
ADD
CELL:LOCALCELLID=0,CELLNAME="Cell0",FREQBAND=60,ULEARFCNCFGIND=NOT_CFG,DLEARFCN=61
336,ULBANDWIDTH=CELL_BW_N100,DLBANDWIDTH=CELL_BW_N100,CELLID=0,PHYCELLID=115,FDDTD
DIND=CELL_TDD,ROOTSEQUENCEIDX=0,EMERGENCYAREAIDCFGIND=NOT_CFG,UEPOWERMAXCFGIND=NOT
_CFG,SubframeAssignment=SA0,SpecialSubframePatterns=SSP7;
ADD EUCELLSECTOREQM:LOCALCELLID=0,SECTOREQMID=0;
ADD CELLOP:LOCALCELLID=0,TRACKINGAREAID=0,MMECFGNUM=CELL_MME_CFG_NUM_0;
//Changing the ENODEBID according to the plan and restarting the eNodeB
MOD ENODEBFUNCTION:ENODEBID=586189;
RST BTSNODE:;
//Activating cells
ACT CELL:LOCALCELLID=0;
//Connecting to the U2000
MOD IPOAM:IPOAMNO=0,IPINTERFACEREF=2,
PEERIPV4ADDR="10.145.35.15",PEERIPV4MASK="255.255.255.0";
1.3.5 Engineering Verification
This section describes how to complete the eAN3810A commissioning task, view deployment
results, and verify services.
Viewing Deployment Results at Sites
This section describes how to view deployment results at sites based on indicator status.
Check the status of indicators on a newly deployed eAN3810A.
The following table shows the indicator status if an eAN3810A is deployed successfully and
working properly. See
Table 1-15
Indicator status of a functional eAN3810A
Indicator
Status
RUN
Steady white
ETH
Slow blinking white (on for 1s and off for
1s)
LINK
Steady white