eAN3810A
Deployment Guide
1 eAN3810A Deployment Guide
Issue 01 (2017-04-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
50
Categor
y
Related Command Parameter
Name
Value Sample Description
indication
the cell.
CELL_FDD
indicates the
FDD mode, and
CELL_TDD
indicates the
TDD mode.
SubframeAssign
ment
SA0
SpecialSubfram
ePatterns
SSP7
Procedure
Step 1
Add NE applications.
1.
Run the
ADD APP
command to add an NE application.
Set the
Application Type
parameter to
LTE(LTE)
.
Step 2
Add IP addresses and routes (used for connection to the S1 interface and the U2000).
1.
Run the
ADD IPINTERFACE
command to add a device IP address used for connection
to the S1 interface.
−
Set the
Interface Reference Type
parameter to
ETHERNET(Ethernet)
.
−
Set the
IP Address
parameter to the eNodeB IP address used for connection to the
S1 interface.
2.
Run the
ADD IPINTERFACE
command to add a device IP address used for connection
to the U2000.
−
Set the
Interface Reference Type
parameter to
ETHERNET(Ethernet)
.
−
Set the
IP Address
parameter to the eNodeB IP address used for connection to the
U2000.
3.
Run the
ADD ROUTE
command to add a static IP route.
Step 3
Add local and peer information of the data-plane and control-plane of the S1 interface.
1.
Run the
ADD LOGICALPORT
command to add a transmission logical port.
Before running the
ADD LOGICALPORT
command, run the
LST LOGICALPORT
command to query whether an
ADD LOGICALPORT
record already exists. If so, skip
the previous substep.
2.
Run the
ADD TRANSPORTDEVICE
command to add a transport device.
3.
Run the
ADD SCTPHOST
command to add an SCTP host.
4.
Run the
ADD USERPLANEHOST
command to add a user-plane host.
5.
Run the
ADD SCTPPEER
command to add an SCTP peer.
Set the
Peer IPv4 Address
parameter to S1-C interface IP.
6.
Run the
ADD USERPLANEPEER
command to add a user-plane peer.
