HUAWEI
61
15
FAQ on E600 Data Card
How to Judge Whether the E600 Data Card has been Installed
Correctly?
After installing the E600 Data Card, two devices are displayed in the device
manager, namely, the “HUAWEI Mobile Connect-3G Modem” and the
“HUAWEI Mobile Conncet-3G Application Interface”.
Check whether these two devices are installed correctly at first. If a yellow
exclamatory mark or other signs appear in front of the devices, it means that the
data card has not been installed correctly, and you need to retry.
After Installing the E600 Management Software, the System Always
Prompts “Data Card not Exi
s
t”. Why?
Probably you have inserted the data card before the completion of installing the
E600 management software. Pull out the data card and insert it after the
installation of E600 management software is completed. Then, install the E600
hardware driver by following the guide for hardware installation.
What Shall I Do if I cannot Access the Internet?
1
Check whether you have activated the wireless online service at first. You can
ask the local network operator on how to activate it;
2
If you affirm that the wireless online service has been activated, refer to the
section of “Internet Service” to implement relevant settings
.
Only Part of the Message is Displayed After I Use the “Paste”
Function to Edit it. Why?
While editing the message, at most 1000 characters are supported in the text. If
the quantity of the pasted information exceeds the limitation, the exceeding part
will be deleted automatically.
When a Message is received, no Prompting Window Appears. Why?
Because you have not set the function of “Display alerts when a message is
Summary of Contents for E600
Page 1: ......
