background image

12 

WEEE Approval 

The wireless device is in compliance with the essential requirements and other 

relevant provisions of the Waste Electrical and Electronic Equipment Directive 

2002/96/EC (WEEE Directive). 

RoHS Approval 

The wireless device is in compliance with the restriction of the use of certain 

hazardous substances in electrical and electronic equipment Directive 

2002/95/EC (RoHS Directive). 

Laws and Regulations Observance 

Observe laws and regulations when using your wireless device. Respect the 

privacy and legal rights of the others. 

Care and Maintenance 

It is normal that your wireless device gets hot when you use it. Before you clean 

or maintain the wireless device, stop all applications and disconnect the wireless 

device from your PC. 

„

 

Use your wireless device and accessories with care and in clean environment. 

Keep the wireless device from a fire or a lit cigarette. 

„

 

Protect your wireless device and accessories from water and vapor and keep 

them dry. 

„

 

Do not drop, throw or bend your wireless device. 

„

 

Clean your wireless device with a piece of damp and soft antistatic cloth. Do 

not use any chemical agents (such as alcohol and benzene), chemical 

detergent, or powder to clean it. 

„

 

Do not leave your wireless device and accessories in a place with a 

Summary of Contents for E176



















Reviews: