manualshive.com logo in svg

Huawei Ascend Y, Maintenance Manual

The Huawei Ascend Y is an impressive smartphone equipped with a range of features to enhance your mobile experience. To quickly get acquainted with its functionalities, a detailed Quick Start Manual is available for download for free at manualshive.com. Explore the manual to unlock the full potential of your device.

Share
Download
background image

Y210 Mobile Phone 
Maintenance Manual 

Contents 

 

Issue 1.0 (2012-11-28) 

Huawei Proprietary and Confidential           

Copyright © Huawei Technologies Co., Ltd. 

iv 

 

9.4.3 USB ....................................................................................................................................................... 43

 

9.4.4 Headset Jack.......................................................................................................................................... 44

 

9.4.5 Keys and Buttons .................................................................................................................................. 46

 

9.4.6 Tricolor Indicator and Touch Key Backlight Circuits ........................................................................... 47

 

9.4.7 Battery Connector ................................................................................................................................. 48

 

9.4.8 Accelerometer ....................................................................................................................................... 49

 

9.4.9 Compass ................................................................................................................................................ 50

 

9.4.10 Proximity Sensor ................................................................................................................................. 50

 

9.4.11 Vibration Motor ................................................................................................................................... 52

 

9.4.12 Receiver .............................................................................................................................................. 53

 

9.4.13 Microphone ......................................................................................................................................... 56

 

9.4.14 Touch Panel ......................................................................................................................................... 57

 

9.4.15 SIM Card ............................................................................................................................................. 58

 

9.4.16 microSD Card ..................................................................................................................................... 59

 

10 Solder Points on the PCBA and BGA Chip ......................................................................... 61

 

11 Functional Tests......................................................................................................................... 67

 

11.1 MMI Test ...................................................................................................................................................... 67

 

11.2 Voice Call Test .............................................................................................................................................. 70

 

 

 

 

Summary of Contents for Ascend Y












































































Reviews:

No comments

Related manuals for Ascend Y

Palm AT&T Treo 680 Starting Manual preview
AT&T Treo 680
Brand: Palm Pages: 52
Partner Tech International MT-6330 User Manual preview
MT-6330
Brand: Partner Tech International Pages: 32
Olitech Easy Mate 3G Instruction Manual preview
Easy Mate 3G
Brand: Olitech Pages: 12
Trium TRIUM GALAXY User Manual preview
TRIUM GALAXY
Brand: Trium Pages: 74
TECNO MOBILE LIMITED CD8 User Manual preview
CD8
Brand: TECNO MOBILE LIMITED Pages: 6
Quadro SQ-40E21T Instruction Manual preview
SQ-40E21T
Brand: Quadro Pages: 125
PCD c5017 User Manual preview
c5017
Brand: PCD Pages: 62
CHI MEI F902 Quick Start Manual preview
F902
Brand: CHI MEI Pages: 26
Alcatel 2038A Quick Start Manual preview
2038A
Brand: Alcatel Pages: 16
Samsung SUNBURST SGH-A697 Series Manual Del Usuario preview
SUNBURST SGH-A697 Series
Brand: Samsung Pages: 185
Samsung SCH-R100 Manual Del Usuario preview
SCH-R100
Brand: Samsung Pages: 132
Kyocera Jax S1360 User Manual preview
Jax S1360
Brand: Kyocera Pages: 67
Zte BLADE A6 Quick Start Manual preview
BLADE A6
Brand: Zte Pages: 88
Azumi A35S User Manual preview
A35S
Brand: Azumi Pages: 30
Zte Cymbal LTE User Manual preview
Cymbal LTE
Brand: Zte Pages: 82
Asus ZENFONE T500 Installation Manual preview
ZENFONE T500
Brand: Asus Pages: 8
Asus Zenfone Max M1 User Manual preview
Zenfone Max M1
Brand: Asus Pages: 22
Asus ZenFone Max Plus User Manual preview
ZenFone Max Plus
Brand: Asus Pages: 21

Brands by name

Popular brands

Load more brands