Huawei Ascend Y Maintenance Manual Download Page 14

Page: 14 / 75

Y210 Mobile Phone
Maintenance Manual

5 Software Upgrade

Issue 1.0 (2012-11-28)

Huawei Proprietary and Confidential

Software Upgrade

5.1 Upgrade Preparation

Prepare the items listed in Table 5-1 before a software upgrade.

Table 5-1

Items to be prepared

Item

Description

Remarks

Upgrade
environment

Computer

The computer is used to copy upgrade
software.

microSD card

The microSD card must have more than 1 GB
free space.

Battery

The battery level must not be lower than 30%.

Upgrade file

Main upgrade package

dload/UPDATE.app

Vendor upgrade
package

vendor_XXX_XXX/UPDATE.app

Upgrade
method

Using the microSD card Normal upgrade

Forcible upgrade

5.2 Performing an Upgrade

To upgrade the Y210, perform the following steps:

Step 1

Format the microSD card.

Step 2

Create a

dload

folder in the microSD card's root directory.

Step 3

Copy the upgrade file to the

dload

folder.

Step 4

Insert the microSD card to the Y210, and power on the phone. On the standby screen, enter

*#*#2846579#*#*

, select

SD card upgrade

, and touch

Confirm

Summary of Contents for Ascend Y












































































Search results

Summary of Contents for Ascend Y

Reviews:

Brands by name

Popular brands

Huawei Ascend Y, Maintenance Manual

Search results

Summary of Contents for Ascend Y

Reviews:

Brands by name

Popular brands