1: Console cable
l
The 8-pin RJ45 connector is inserted into the console port (CON/AUX port) of the AR200-
S.
l
The DB9 male connector is connected to the maintenance terminal, such as a computer.
2: WAN port cable that connects the AR200-S to the upper-layer network
l
On an AR201-S router, an FE port functions as the WAN port and connects to a network
cable with RJ45 connectors.
l
On an AR207-S router, an ADSL port functions as the WAN port and connects to a network
cable with RJ11 connectors.
3: LAN port cable, which is connected to a computer with a network cable (RJ45 connectors).
4: Ground cable. The M4 connector is connected to the AR200-S and the M6 connector is
connected to ground. The cable is in yellow and green.
l
When the AR200-S is placed on the desktop or installed in a cabinet/rack, the ground cable
is connected facing downwards, as shown in
interfere with other devices in the cabinet/rack.
l
When the AR200-S is wall mounted, the ground cable is connected facing left, as shown
in
5: external power adapter, which is connected to the AC power supply to output DC power to
the device.
Power adapter output power:
l
AR200-S series: 36W
NOTE
The AC power cable must be secured using a latch.
2.4 Powering on the Device
This section provides the checklist used to check the AR200-S before powering on it.
Checklist
No.
Item
Method
1
The power cables and ground cables are copper wires, and
are not spliced or damaged. The cables are safely
connected and in compliance with standards.
View
2
The power cables and ground cables are connected safely.
The spring washers of the ground cable terminals are on
the flat washer.
View
3
All signal cables to be deployed pass the continuity check. Measure
4
No signal cables are near the cabinet's heat vents.
View
Huawei AR200-S Series Enterprise Routers
Quick Start Guide
2 Installation Product
Issue 01 (2011-12-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
15
