Type
Color
Status
Description
Blinking
once every
5s (0.2 Hz)
The system is running properly, the Ethernet
connection is normal, and no STA is associated with
the AP. The system is in low power consumption
state.
Alarm
Green
Blinking
once every
0.25s (4
Hz)
l
The software is being upgraded.
l
After the software is uploaded and started, the AP
working in Fit AP mode requests to go online on
the AC and maintains this state until it goes
online successfully on the AC (before the
CAPWAP link is established).
l
The AP working in Fit AP mode fails to go online
on the AC (the CAPWAP link disconnects).
Fault
Red
Steady on
A fault that affects services has occurred, such as a
DRAM detection failure or system software loading
failure. The fault cannot be automatically rectified
and must be rectified manually.
Link/ACT indicators
Link/ACT indicators consist of Link/ACT0, Link/ACT1, and Link/ACT2, showing link status
of interfaces GE0/PoE, GE1, SFP respectively.
Table 1-3
Descriptions about the Link/ACT indicators
Type
Color
Status
Description
LINK
Green
Steady on
The system is running properly, the Ethernet
connection is normal, and no data is being
transmitted.
ACT
Green
Blinking
The system is running properly, the Ethernet
connection is normal, and the AP is transmitting
data. The indicator blinks more quickly when more
data is being transmitted.
Wireless indicators
Wireless indicators consist of Wireless0 and Wireless1, showing wireless link status of the 5
GHz and 2.4/5 GHz radio interfaces respectively.
Huawei AP8030DN & AP8130DN
Hardware Installation and Maintenance Guide
1 AP8130DN & AP8030DN Overview
Issue 02 (2014-12-05)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5
