Huawei Access Controller AC6005 Ordering Guide Public
Part
Number
Part Description
Configuration Description
G.652D, 3mm, 10m
1.
This item is a single-mode optical fiber and can
be used only with a single-mode optical module.
2.
If an optical module with independent transmit
and receive channels is used on the optical
interface, each optical interface requires one Tx
fiber and one Rx fiber. If a single-fiber
bidirectional optical module is used, each
interface requires only one optical fiber.
14130001
Adapter, FC-FC, 2, Silvery white, Shell:
Metal, Sleeve: Zirconia, Round
Optional. Quotation is required.
1.
This item is used to connect two optical fibers
with FC connectors.
2.
The quantity is determined according to project
requirements.
14130134
Adapter, SC-SC, 2, Blue, Shell: Plastic,
Sleeve: Zirconia, Square
Optional. Quotation is required.
1.
This item is used to connect two optical fibers
with SC connectors.
2.
The quantity is determined according to project
requirements.
14130248
Adapter, LC/PC-LC/PC, 2, Blue, Shell:
Plastic, Sleeve: Zirconia, Square
Optional. Quotation is required.
1.
This item is used to connect two optical fibers
with LC/PC connectors.
2.
The quantity is determined according to project
requirements.
A power adapter (14130001, 14130134, and 14130248) is used to connect two optical jumpers or to
connect an optical jumper to an optical module when connectors of the optical jumper do not match with
the optical module interfaces.
(3)
Select network cables.
Purchase network cables according to project requirements.
Table 1-6
List of network cables
Part
Number
Part Description
Configuration Description
25050014
Twisted-Pair Cable, 100 ohm, Category 5e UTP,
0.51 mm, 24 AWG, 8 Cores, PANTONE 430U, Use
with Plug: 14080082
Quotation is required. The quantity is
determined according to project
requirements.
14080082
Network Interface Connector, 8-Bit 8-Pin, Crystal
Plug, Matching 25050014
Quotation is required. The quantity is
determined according to project
requirements.
