Supplied Parts and Hardware
Tools Needed (Not lncluded)
[A] x8
Screw
ST4.8x16mm
[B] x8
Washer
M5
[C] x2
Bolt
M4x8mm
[D] x4
Bolt
M5x12mm
[E] x2
Cable Clip
[01] x1
Bottom Plate
[02] x1
Plastic Cap
[03] x4
Connector
[05] x1
Keyboard Tray Support
[06] x1
Keyboard Tray
[07] x1
Long Pad
[F] x8
Bolt
M5x6mm
2
Tape Measure
Pencil
Drill
5/64in. (2mm)
Wood Drill
Phillips
Screwdriver
Option A: For Unobstructed Table Installation
Step 1 Install the Bottom Plate to the Table
For unobstructed table installation, follow Option A
For table with beams installation, follow Option B or Option C
Attention: Install the bottom plate where the keyboard tray should be installed.
1 3/8in.(35mm)
A-1
Position the bottom plate [01]
at your desired place. Reserve
1 3/8in.(35mm) spacing
between the bottom plate
edge and the table edge and
mark the positions for drilling