4
Install the bottom plate [01] under the table with screws [A] and
washers [B], and then tighten the screws.
2 11/64in.
(55mm)
B
A
Drill 8 pilot holes using a
5/64 in. (2mm) diameter
drill bit.
ø5/64 in. (2mm)
5/8 in. (16mm)
B-2
B-3
B-4
Phillips Screwdriver
(Not Included)
Position the bottom plate
[01] at your desired place.
Reserve 2 11/64in. (55mm)
spacing between the bottom
plate edge and the table
edge and mark the positions
for drilling