5. Adjust Gas Spring Tension
75 mm ≈ 3 in.
100 mm ≈ 4 in.
Be sure to keep the arm in
horizontal position during
adjustment. Or else, it would
be difficult to adjust the
mount or damage the mount.
1. If the monitor can stay at the desired height
by itself, no adjustment needed.
2. If the monitor rises up, press the arm to keep
it in horizontal position and then use the Large
Allen Key (F) to turn the bolt
clockwise(“-” direction) to reduce tension of
the arm only until the monitor can stay at the
desired height by itself.
3. If the monitor falls down, lift the arm to keep
it in horizontal position and then use the Large
Allen Key (F) to turn the bolt
counter-clockwise(“+” direction) to increase
tension of the arm only until the monitor can
stay at the desired height by itself.
4-1 Choose Proper Bolts
4-2 Install Monitors to the Arms
1
0.1-0.2in.(3-5mm) spacing left
A
100x100mm
75x75mm
75x75mm
100x100mm
Phillips
Screwdriver
[Not Included]
Flat back monitor
Curved back monitor
4. Attach Monitors to the Arm
B-1
B-2
100x100mm
75x75mm
75x75mm
100x100mm
The tension is preset at
8.8-11 LBS(4-5kg). After
hanging the monitor to
the mount, please release
the monitor slowly to
prevent it from falling
suddenly.
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
