User's Manual
HT8000-I/HT8000-II/HT8000-VI
3 Deployment and Maintenance
Version 1.4(Oct.2019)
Beijing Huahuan Electronics Co., Ltd.
87
3
Deployment and Maintenance
3.1
Device Monitoring
The deployment, running, and maintenance of HT8000-I/HT8000-II/
HT8000-VI device reply on network element/subnet management system.
This section gives a brief description of our company’s EzView network
element/subnet management software. For more details, please refer to
EzView User’s Manual
and the online help.
EzView is a GUI based NE/SN management software. It is connected to
the monitored NE through Ethernet. HT8000-I/HT8000-II/HT8000-VI
device uses Ethernet to connect local network management computer. The
other nodes in the network can realize remote management through
ESC/OSC channel. When remote management is achieved through ESC
channels, you need to enable GCC functions of the corresponding
interface.
The factory default IP address of the device is: 192.192.4.2. In actual
networking, each end of device must be assigned an IP address first. The IP
addresses of nodes in the network must be unique.
3.1.1 IP Address/Subnet Mask Query and Settings
HT8000-I/HT8000-II/HT8000-VI device needs to log in Telnet via
Ethernet monitoring interface for IP address query and setting. If the
factory out-of-band IP address is modified and the current address is
forgotten, you can log in hyper terminal via CONSOLE monitoring
interface to get the real address of the device.
