Installation and
operation instruction
1 pc
Name
Qty.
Bolt(M4)
2 bolts
Fan
L
LOW
MED
HI
Motorized
valve
N
L
3 Alarm
When the temperature of controller is over working temperatu
-re, the “room temp” display area will display “ E1 ”
DŽ
4 Wiring diagram
5 Packing accessories
N
V
6 Installation instruction
1. As the figure connect the
product’s terminals with the
reserved wires in the 86 box;
2. Open the front cover from
two lower button positions;
3. Use M4 botls to install the box
bottom to the standard 86 box;
(the required depth of the box
bottom ≥50mm)
4. Fasten the front cover.
Please correctly wiring as the wiring figure; there are air vent
around the temperature controller cover, please install the
controller after painting the wall, for avoiding the water, sand
etc. to get into the temperature controller, and cause the
controller damage.
WARNING
Maintain guide:
If the controller can’t control fan coil noamally, please
contact the customer service.
2
installation manual
