HTW HTW-ESTGAS14000SETA, Owner'S Manual

Page: 34 / 92

STEP 1
1-1. Attach the 3-piece post brackets to each base position as shown in
the picture.
1-2. Use 3 medium bolts (M8x15) to attach the post brackets and the
stand.
STEP 2
2-1. Attach the post to the top of the 3-piece post brackets.
2-2. Use 6 large bolts and flange nuts (M6) to connect the pole to the
3-piece pole brackets. Tighten the bolts and nuts.
Screws
Post
STEP 2
Nut
Screws
Base
Post
support
STEP 1
ASSEMBLY PROCEDURES
NOTE: Attach the wheel assembly (optional) to the base.
A. Align the holes in the wheel bracket with the corresponding
holes in the base.
B. Ensure that the wheel assembly is parallel to the base and fully
tighten the bolts.
12