N50 Imaging Unit Series
│ Quick Installation Guide
11
3.4 Adjusting the Camera Position
1. Use the cross screwdriver to untie the cross screw on one side of the mount bracket in a way that you can
tilt the camera.
2. Release the screw on the retaining ring to adjust the camera angle.
3. After adjustments, fasten the screws and retaining ring back to the camera.
FIGURE 3-6: ADJUSTING THE CAMERA POSITION
3.5 Adjusting the zoom & focus (vari-focal) / default & reset button
1. Use a screwdriver to adjust the Near/Far and Tele/Wide controls. Please be careful when adjusting
Near/Far and Tele/Wide so as to avoid damage to the lens.
2. Use a flat head screwdriver to open the cover, then user can press default button to factory setting or
reset button to reboot system.
FIGURE 3-7: ADJUSTING THE ZOOM & FOCUS (VARI-FOCAL)
Caution
After ajustment, tighten the screws to avoid water leaking issue.
Retaining ring
Cross screw
Tele/Wide control
Near/Far control
Default/Reset (inside)
