background image

Name

Enter a name for the extension being created. Example: John Smith.

E-mail

Enter the e-mail address associated with this extension. This e-mail address will receive all
system notification messages. Example: [email protected]

Department

Department to which extension will belong to. Example: Sales.

Click on the Save button.

Registering Phone

This chapter describes how to register Htek phone using Hostname or IP Address.

The following topics are covered:

Hostname or IP Address

Hostname or IP Address

Login to phone web administration interface

Open a new browser window and enter your phone IP address in order to access the phone

web administration interface login screen. Example: http://192.168.1.22

Login to phone web administration interface with your username and password. Please note,

factory default login details are username: admin and password: admin.

Click on Profile on the main menu.

Enter or set the following details into the respective fields.

REQUIRED FIELDS:

Primary SIP Server

- Example for Hostname: voip.bicomsystems.com

- Example for IP Address: 192.168.1.10

Click on SaveSet button.

Click on Account on the main menu.

Account Active

Summary of Contents for UC926E













Reviews: