background image

Find the phone IP address

Find out your Htek phone IP Address.

Press the Menu keysoft 3 times.

The IP address will be displayed on the top of display.

Reset to factory settings

This step is not required for brand new out-of-the-box phones, however, if the phone has been
already used then it is a must.

Open a new browser window and enter your phone IP address in order to access the phone

web administration interface login screen. Example: http://192.168.1.22.

Login to phone web administration interface with your username and password. Please note,

factory default login details are username: admin and password: admin.

Click on Management tab.

Click on Upgrade on the left navigation menu.

Click on Reset to Factory button and confirm in order to reset the phone to factory settings.

Phone will be reset to the factory settings and reboot.

Wait sometime prior for device to reboot.

NOTE: 

 Do not unplug or remove power to the phone while it is updating firmware and

configurations.

Registering phone

This chapter describes how to identify Htek phone model, requirements that must be met and
how to register the phone using manual configuration or auto provisioning.

The following topics are covered:

Manual configuration

Auto provisioning

Manual configuration

This chapter describes how to set UAD settings, create PBXware extension and register the
phone.

The following topics are covered:

UAD settings

Creating extension

Registering phone

Summary of Contents for UC926E













Reviews: