background image

administration login page. Example: http://192.168.1.10.

Login to PBXware with your e-mail address and password.

Edit extension.

On the Extensions page click on the edit icon corresponding to your extension.

Click on Advanced Options button.

Navigate down to the Auto Provisioning settings.

Make sure Auto Provisioning is set to Yes.

Click on the Save button to save changes.

Click on Enhanced services.

Click on Directory / BLF List check box and click on Save button in order to enable this

feature.

Click on Directory / BLF List Edit button.

Enter user extension number and click on the BLF check box.

Click on Save button.

Phone Settings

Login to phone web administration interface.

Open a new browser window and enter your phone IP address in order to access the phone

web administration interface login screen. Example: http://192.168.1.22.

Login to phone web administration interface with your username and password. Please note,

factory default login details are username: admin and password: admin.

Click on Function Keys.

Configure 1 to 36 DSS Keys from the list.

Type: Select BLF.
Value: Enter user extension. Example: 1005
Label: Enter Username. Example: John

Click on Confirm button to save changes.

Additional Configuration Template

If You want to include some additional UAD configuration for Htek UC926E, just add fields to
User Agent General Auto Provisioning Template in Settings -> UAD -> Htek UC926E
menu, or add them directly to the extension in UAD Auto Provisioning Template section.

Retrieved from "http://wiki.bicomsystems.com/Htek_UC926E"

Summary of Contents for UC926E













Reviews: