![background image](http://html1.mh-extra.com/html/htc/800-rx/800-rx_manual_2179101034.webp)
Usage
HTC 800 RX
26
2.0
7. Turn on the Mist-Cooler by turning the control (position 5 Figure 3-2, page
11
)
to "ON".
8. Switch off the Mist-Cooler by turning the control (position 5 Figure 3-2, page
11
) to "OFF" when grinding is finished.
9. Turn the tap to the closed position when grinding is finished.
4.10
Preparations for wet grinding
1. Always use liquid suction when wet grinding.
Tip!
Never use a dust extractor, as blockages may develop in the dust
extractor's suction hose and filter.
2. Inspect the floor carefully and remove any objects sticking up, such as
reinforcement rods or bolts, and any debris that could get caught in the machine.
3. Attach the appropriate tool to the machine.
4. Set the handle to the working position, see Figure 4-2, page
17
.
Warning!
Only use cold water with no chemical additives.
5. Fill the tank with cold water.
6. Turn the tap on the left side of the machine to the open position, position 9
Figure 3-2, page
11
.
7. Turn the tap to the closed position when wet grinding is finished, position 9
Figure 3-2, page
11
.
4.11
Manoeuvring via the control panel
Tip!
Drive the machine manually in difficult to navigate spaces.
During manual driving, the operator pushes the machine forwards across the floor
surface and manoeuvres it via the control panel, see Figure 3-3, page
12
.