HTC 80 iD, Manual, Page: 60 / 61

Environment HTC 80 iD
52 1.1
9 Environment
HTC products are constructed mainly of recyclable metal and plastic. The main
materials used are listed below.
Machine part Material Waste management
Chassis
Frame Metal, powder-coated Metal recycling
Front wheels Metal, plastic and rubber Metal recycling
Back wheels Plastic and rubber Combustible
Dust extractor
Cylinder Metal, powder-coated Metal recycling
Longopac holder Plastic, ABS Plastic recycling/Combustible
Cover Metal, powder-coated Metal recycling
Camlock Metal inc. aluminium
Metal recycling
1)
Rotation joint
pre-separator Plastic (nylon) Plastic recycling/Combustible
Hose Plastic (PUR) and metal wire Plastic recycling/Combustible
HEPA filter Hepa 13 Metal, glass fibre reinforced paper
and hot-melt adhesive
Metal recycling
2)
Pre-filter Metal, polyester and hot-melt
adhesive
Metal recycling
2)
Electrical system
Cables Copper conductors with Neoprene
and PVC coating Waste cable
Motor Metal: Steel, aluminium and
copper Electronic waste
Electrical components Metal and plastic Electronic waste
1)
If possible, different metals should be separated.
2)
If the filter contains any hazardous substance from the grinding dust, it must be treated as
hazardous waste.
For recycling and scrapping of components, see the applicable national regulations for
each country.○