MULTITEST M72 - M73 - M74 - M75
EN - 10
8.
DC voltage value
Example of display of DC voltage. The
minimum reading limit of DC voltage is
1.2V. Lower input values are displayed
as 0.0V.
9.
MODE
PEAK
Press
MODE PEAK
for less than 1 second to pass to frequency
measurement (only during AC measurements, see paragraph 4.3.1)
10.
MODE
PEAK
Press
MODE PEAK
for more than 1 second to detect the voltage peak value
(see paragraph 4.2.3)
11.
FUNC
HOLD
Press
FUNC HOLD
for less than 1 second to block the detected values on the
display (see paragraph 4.2.1)
12.
FUNC
HOLD
Press
FUNC HOLD
for more than 1 second to detect maximum, minimum
and average voltage values (see paragraph 4.2.2)
4.3.1. Frequency
measurement
1. In order to detect minimum, average, maximum and peak values of frequency it's
necessary to pass to this measuring parameter.
2.
MODE
PEAK
During AC measurements it’s possible to pass to frequency measurement by
pressing
MODE PEAK
for less than 1 second
3.
Frequency value
Example of display of frequency value.
The minimum reading limit of frequency
is 30.0Hz. Lower input values are
displayed as <30.0Hz
4.
MODE
PEAK
To resume voltage measurement press
MODE PEAK
for less than 1 second
5.
MODE
PEAK
To detect the frequency peak value press
MODE PEAK
for more than 1
second (see paragraph 4.2.3)
6.
FUNC
HOLD
To block the detected frequency value on the display press
FUNC HOLD
for
less than 1 second (see paragraph 4.2.1)
7.
FUNC
HOLD
To detect maximum, minimum and average frequency values press
FUNC
HOLD
for more than 1 second (see paragraph 4.2.2)