MULTITEST M72 - M73 - M74 - M75
EN - 8
4.2.
HOLD, MAX/MIN/AVG, PEAK±
The following functions are available for measurements of AC and DC voltage, AC current,
frequency and resistance.
4.2.1. HOLD
The HOLD function permits to block on the display the detected value during
measurements of AC and DC voltage, AC current, frequency and resistance. Just press
FUNC HOLD
for at least one second. The symbol HOLD is displayed. To escape this
function press again
FUNC HOLD
or the arrow keys.
This function is not available when MAX/MIN/AVG or PEAK± functions are active.
4.2.2. MAX/MIN/AVG
During measurements of AC and DC voltage, AC current, frequency and resistance it’s
possibile to measure and display the maximum (MAX), minimum (MIN) and average
(AVG) valus of the quantity under test. Press
FUNC HOLD
for more than one second to
enter this function and press it repeatidly for less than one second to run through MAX,
MIN or AVG. The corresponding symbol is displayed.
Maximum, minimum and average values are detected since this function is activated and
are continuously updated even if not displayed. For example, while the AC current average
value is displayed, the maximum and minimum values of the same quantity are
continuously updated.
To escape the MAX/MIN/AVG function press again
FUNC HOLD
for more than one
second or the arrow keys.
The MAX/MIN/AVG function is not available when HOLD or PEAK± functions are active.
4.2.3. PEAK±
During measurements of AC and DC voltage and AC current it’s possibile to measure and
display the maximum (PEAK+) and minimum (PEAK-) peak values of the quantity under
test with a resolution of 1ms. Press
MODE PEAK
for more than one second to enter this
function and press it repeatidly for less than one second to run through PEAK+ or PEAK-.
The corresponding symbol is displayed.
Maximum and minimum peak values are detected since this function is activated and are
continuously updated even if not displayed. For example, while the maximum peak values
of AC current is displayed, the minimum peak value of the same quantity is continuously
updated.
When displaying maximum and minimum peaks it’s not mentioned whether the
corresponding quantity is AC or DC: a peak value is absolutely a peak value, regardless of
the quantity at which it’s detected.
To escape this function press again
MODE PEAK
for more than one second or the arrow
keys.
The HOLD and MAX/MIN/AVG functions are not available when when PEAK± is active.
