JUPITER
IT - 32
9. Upon recognition of the event,
measurement stops automatically
and the instrument
shows, in its main display, the
Max RMS
value calculated according to the evaluation
time of
100ms
(default) indicated on the secondary display (see Fig. 43
–
right side)
10. Press keys
/
or
to select the display of the following parameters:
Peak value
“
Pk
”
calculated in
1ms
(see Fig. 44
–
left side)
Max RMS value calculated in
16.7ms
Max RMS value calculated in
20ms
Max RMS value calculated in
50ms
Max RMS value calculated in
100ms
Max RMS value calculated in
150ms
Max RMS value calculated in
175ms
Max RMS value calculated in
200ms
Fig. 44: Examples of display of inrush current
11. If the measured current is higher than the set FS of the clamp, a message like the one
in Fig. 44
–
right side (relevant to FS = 3000A) is shown on the display.
12. Press key
GO/HOLD
again to start a new measurement or turn the rotary switch to quit
the function.