background image

   HTA106 

 

 

 

 

EN – 9 

8. SERVICE 

8.1. WARRANTY 

CONDITIONS 

This equipment is guaranteed against material faults or production defects, in accordance 
with the general sales conditions. During the warranty period (one year), faulty parts may 
be replaced. The manufacturer reserves the right to decide either to repair or replace the 
product. In case the instrument is returned, all transport charges must be paid by the 
customer. The instrument must be accompanied by a delivery note indicating the faults or 
reasons of returning. The returned tester must be packed in its original box. Any damage 
occurred in transit because of lack of original packaging will be debited to the customer. 
The manufacturer is not responsible for any damage against persons or things. 
Accessories and batteries are not covered by warranty. 
 
The warranty shall not apply in the following cases: 
 

  Faults due to improper use of the equipment. 

  Faults due to combination of the tester with incompatible equipment. 

  Faults due to improper packaging. 

  Faults due to servicing carried out by a person not approved by the company. 

  Faults due to modifications made without explicit authorization of our technical 

department. 

  Faults due to adaptation to a particular application not provided for by the definition of 

the equipment or by the instruction manual. 

 
The contents of this manual cannot be reproduced in any form without our authorization. 
 

Our products are patented. Our logotypes are registered. We reserve the right to 
modify characteristics and prices further to technological developments.

 

 

8.2. SERVICE 

If the equipment does not work properly, before contacting the SERVICE, test the 
batteries, the probes and change them if necessary. If the equipment still does not work, 
make sure that your operating procedure complies with the one described in this manual. 
In case the instrument need to be returned, all transport charges must be paid by the 
customer. The instrument must be accompanied by a delivery note indicating the faults or 
reasons of returning. The returned tester must be packed in its original box. Any damage 
occurred in transit because of lack of original packaging will be debited to the customer. 
 
 

Summary of Contents for HTA106











Reviews: