XL421 - XL422
4 INSTRUMENT
DESCRIPTION
I1
I1
I2 I3
1
6
2
3
5
4
LEGEND:
1. Flexible head
2. “STATUS" LED
3. "ALARM" LED
4. RS232 port
5. "START/STOP" key
6. Press here to open the
head
Fig. 1: Instrument description
4.1 KEYBOARD
LED “STATUS” blinks every time the
START/STOP
key is pressed.
5 INITIAL
SETTINGS
5.1 DATE, TIME AND MEASURING INTERVAL
It’s possible to set measuring interval and date and time by using the management
program DATALINK. This program enables to:
¾
Set the Measuring Interval.
¾
Control data and time of the instrument’s internal clock.
¾
Set instrument date and time.
¾
Check battery status.
How to operate:
1. Connect the instrument to PC COM using included serial cable.
2. Run DATALINK software.
3. Choose the correct COM port with the command
Settings
Æ
“
Port
”. Using “Autoset”
command for automatic searching for serial port.
4. Choose the command
Settings
Æ
"
Instrument’s Settings
” to setting instrument’s
Date and Time of start recording and Measuring Interval selecting values 1s, 6s, 30s,
1min or 5min on “
Meas. Interv.
”
5. Confirm with “
Send
” command.
WARNING
The instrument could keep the data stored even without batteries. The set date
and time don’t get lost provided that the battery replacement takes less than 2
minutes.
EN - 6
www.
.com
1.800.561.8187
