XL421 - XL422
7 LED MESSAGES DESCRIPTION
For the STATUS and ALARM LEDs messages please refer to the following table:
LED START/STOP
Key Light
Description
STATUS
Kept pressed 3
seconds at least
On for 1 second
Recording process correctly started.
The previous recorded data was
transferred to a PC
STATUS
Kept pressed 6
seconds at least
6 times blinking
after 1 second on
Recording process correctly started.
The previous recorded data was not
transferred to a PC and were lost
STATUS Not
pressed
2 times blinking
every 3 seconds
Waiting for the next minute
(seconds=00)
STATUS Not
pressed
1 time blinking
every 3 seconds
Recording in progress
STATUS
Pressed
3 times blinking
The recording process was stopped
ALARM Not
relevant
1 time blinking
every 3 seconds
Low batteries. Stop the recording,
transfer the data to a PC and replace
batteries
8 CONNECTION OF INSTRUMENT TO PC
Connection of the instrument to a PC is made with a serial cable supplied with the
instrument. To download data to the PC (after installation of DATALINK software) keep to
the herewith procedure:
1. Connect the serial cable to the meter serial port and to a RS232 COM port of the PC.
2. Run "DATALINK" software.
3. Choose
Settings
Æ
”
Port
" and select the COM port. If necessary using "Autoset"
command for choosing automatically the correct COM port.
WARNING
During Recording operations RS-232 serial communications to PC is
not possible.
4. Click on
Download
key to starting download procedure. A dialogue box displays the
recording stored in the instrument’s memory. By choosing the “
download
” command
the data transfer procedure will start.
5. At the end of the download the RECORDING application will automatically start.
6. Choose the commands
Recording Analysis
Æ
"
Parameters
" the recording values are
displayed.
7. For more details see the HELP on line by clicking the right mouse button.
EN - 11
www.
.com
1.800.561.8187