IMP57
EN - 7
The instrument is fully controlled by means the RS232 serial interface. The IMP57 can be
connected to the following MASTER instruments:
MASTER Instrument
Instrument Type
Firmware Upgrading
Proc.
GSC57, GSC53, GENIUS5080E,
GSC53N, SIRIUS 89
1
1.37 or successive
User (*)
MACROTEST 5035, SIRIUS 87
2
1.16 or successive
User (*)
COMBITEST 2019
1.33 or successive
HT
COMBITEST420, COMBITEST419,
SPEEDTEST 418
3 1.02
or
successive ----
FULLTEST4058 4
1.08
or
successive
HT
FULLTEST4050
5
A3.0 or successive HT
Table 1: Instruments Type
(*) If the Firmware release is older, please execute the Firmware upgrading procedure described in file
"
Readme_Leggimi.pdf
" included in package.
HT recommends to check the Firmware release of the MASTER instrument before attempt
to execute the test. This information is present in the "Switch-ON screen" of the MASTER
instrument.
Test results are sent by IMP57 to MASTER instrument through C2001 or C232NG1 cable.
All the stored test results can be reviewed on the MASTER instrument display and sent to
a personal computer.
