FLASHMETER
EN - 11
5.1.4. Continuity
test
CAUTION
Before attempting any resistance measurement, cut off power supply from
the circuit to be measured and make sure that all capacitors are discharged,
if present.
Fig. 6: Use of the instrument for Continuity test
1. Switch on the instrument by pressing the
ON/OFF
key. The measuring mode
Ω
is
automatically selected and the indication
“
OL.
”
appears on the display.
2. Press the
V/
Ω
/
key until the symbol
“
”
appears on the display.
3. Insert the red cable into input terminal
V/
Ω
/
and the black cable into input terminal
COM
.
4. Position the test leads in the circuit to be measured (see Fig. 6). The continuity buzzer
activates for R<40
5. To use the AutoHOLD function, see § 4.3.2
