FLASHMETER
EN - 9
5.1.2. AC voltage measurement
CAUTION
The maximum input AC voltage is 600V. Do not measure voltages
exceeding the limits given in this manual. Exceeding voltage limits could
result in electrical shocks to the user and damage to the instrument.
Fig. 4: Use of the instrument for AC voltage measurement
1. Switch on the instrument by pressing the
ON/OFF
key. The measuring mode
Ω
is
automatically selected and the indication
“
OL.
”
appears on the display.
2. Insert the red cable into input terminal
V/
Ω
/
and the black cable into input terminal
COM
3. Position the test leads in the desired spots of the circuit to be measured (see Fig. 4).
The instrument automatically switches to AC voltage measurement for
value > ca.
1.5V
. The display shows the value of voltage.
4. The message
“
O.L.
”
indicates that the value of AC voltage exceeds the maximum
measurable value.
5. To use the AutoHOLD function and the NCV sensor, see § 4.3.2 and § 4.3.4
