MI TOWER
4
m - ASSEMBLY
Page
13
STEP 1
Fully insert the adjustable
legs with castors into two
frames, turning the leg’s height
adjustment collar to bring each
leg 25mm from the lowest
position.
STEP 2
Attach a guardrail brace panel to the vertical tube of one frame with the
upper claw positioned above the fourth rung and with all claws facing
outward. Make sure the claws are correctly locked on to the frame tube.
Now attach the second frame to the guardrail brace panel to create the
base frame assembly. Lock all four castors and using a spirit level as a
guide, adjust each leg to bring the base square and level.
STEP 3
Construct two sets of conjoined frames, these will give you two 2m
sections and will speed up the erection process. Release the frame clips
on one four rung frame and fit it on to a second four rung frame. Apply
the frame clips and ensure they are correctly locked. Repeat this with the
second set. Fit one set of conjoined frames to a base frame and apply
the frame clips. Repeat this with the second set. Fit one set of conjoined
frames to a base frame and apply the frame clips. Repeat this with the
second set.
STEP 4
Next, attach one guardrail brace panel with its lower jaw positioned
above the sixth frame rung. It must be fitted on the opposite side to
the first guardrail brace panel to ensure stability. Ensure all claws are
facing outward and correctly locked on to the frame tube.
332_MI TOWER_12/06/2019