07/2013
SECURIO C 16
13
english
8 Disposal / Recycling
Electrical and electronic old de-
vices contain a variety of valuable
materials, but also hazardous
substances which were required
for function and safety. Incorrect
disposal or handling can be dan-
gerous to your health and the environment.
Never dispose of old devices in the house-
hold waste. Observe the current applicable
regulations and use the collection points for
returning and recycling electric and elec-
tronic devices. Dispose of all the packaging
materials also in an environmentally-respon-
sible way.
9 Technical data
Cutting type
Strip cut
Cross cut
Cut size
(mm)
5.8
3.9
4 x 25
Security level
DIN 66399
P-2, T-2, E-2
P-2, T-2, E-2
P-4, T-4, E-3, F-1
Cutting capacity*
(sheets), A4
70 g/m
2
80
g/m
2
16 - 18
15 - 17
13 - 15
12 - 14
6 - 7
5 - 6
Weight
4 kg
4.5 kg
Intake width
225 mm
Cutting speed
44 mm/s
Power supply
215 - 240 V, 50 - 60 Hz
110 - 130 V, 50 - 60 Hz
Power consumption
with max. number of sheets
300 W
Operating mode**
Brief operation
Operating time**
3 min
Idle time**
60 min
Ambient conditions in operation:
Temperature
Relative humidity
Height above sea-level (MSL)
-10 °C to +25 °C
max. 90 %, without condensation
max. 2,000 m
Size
W x D x H (mm)
366 x 258 x 455
Shredded material container volume
25 l
Noise level
(Idle running)
55 dB (A)
* The maximum number of sheets (DIN A4, 70 g/m² or 80 g/m²), fed lengthways, which can be cut in one cycle. The
performance data is determined when the motor is cold and the cutting device is freshly oiled. A weaker mains voltage
or a different mains frequency to the one speci
fi
ed could result in less sheet capacity and increased noise during op-
eration. The sheet capacity can vary depending on the structure and properties of the paper and on the way it enters.
The performance data in 80 g/m² is calculated.
** Only US-version: Continuous operation