8
Powerline FA 500.3
07/2012
FA 500.3
1
2
Z
Baling press operating status
(only for combined machines)
Indicator: oil reservoir empty
Function button
“On/off/start”
Indicator: Level 2 overload
only for machines with
1.9 x 15 mm cutting widths
Display with no function
Indicator: ready for operation
R button:
Cutting unit runs in reverse
Attaching the waste bag (Solo version)
• Open the front door and pull out the waste trolley.
• Put in a new waste bag and fold it approximately
20 cm over the top frame tube. When using a two-
chamber system, make sure that there is also around
20 cm of plastic foil below the brackets (1).
• Push in the waste trolley and close the front door.
Inspecting the safety devices
Check that the safety devices are working
properly:
• At the start of each shift
• After any maintenance or repair work
Do not start the machine until you have checked the safe-
ty devices and found them to be in perfect working order.
If any defect arises during operation stop the machine
immediately and make sure it is corrected.
6 Operating and display elements
7 Start-up
1
Indicator: Door open or
emergency stop was pressed
Indicator: Level 1 overload
Indicator: Paper container full
https://www.supplychimp.com/