07/2012
Powerline FA 500.3
13
FA 500.3
Cleaning the tensioning station (monthly)
• Remove the feeding table and the front panel of the
tensioning station.
• Remove particles and dirt.
Cleaning the conveyor-belt area (monthly)
• Remove the covers on both sides.
The cleaning openings in the conveyor-belt covers are
now accessible.
• Blow out the conveyor-belt area with compressed air
or use a vacuum cleaner to remove the dirt particles.
Dispose of the machine in an environmentally sound
way at the end of its service life. Observe the current
regulations when doing this. As legislation is subject to
ongoing changes, we request that you contact your local
authorities at the appropriate time. As the manufacturer,
HSM would be glad to advise you on the disposal of your
old machine.
• Machine on pallet with a wooden frame, strapped with
packing tape and packed in foil
• 5 waste bags, order no. 6.205.595.000 (Solo version)
• Special cutting block oil
5 l container with spout, order no. 1.235.997.501
• Operating
manual
Tightening the feed belt
The feed belt should not slip when loaded with material.
• Switch off the shredder.
• Loosen the hex nuts (1) on the left and right sides of
the snub roller.
• Loosen the lock nuts (2) of the tensioning bolts (3).
• Tighten the feed belt
evenly
using the tensioning
bolts.
Note:
Only tighten the feed belt until it stops slipping. The feed
belt bearing may be damaged if it is tightened too much.
• Tighten the hex nuts on the snub roller and the lock
nuts on the tensioning bolts again.
You must check that the feed belt runs
straight:
Switch on the shredder and let it run for
10 minutes. During this time, the feed belt
must run in the middle of the snub roller. If it
slips to the left or right edge, you must alter
the setting of the snub roller.
Checking the feed belt for wear
The surface of the feed belt can become worn after long
periods of use. If you can see the fabric inlay in the belt, it
must be replaced. Please notify our customer service.
1
1
2
3
2
3
10 Disposal / Recycling
11 Scope of supply, accessories
https://www.supplychimp.com/
