HSE24 123526, Instruction Manual

Page: 5 / 24

ASSEMBLY INSTRUCTIONS
1. Install the Ball Pin.
Pull the ball pin out to expand the main frame,
and then insert the ball pin back.
2. Install the Front and Rear Stabilizers.
Loose the screws in the stabilizer, and insert
them into the corresponding grooves and tighten
in each stabilizer.
3. Install the Handlebar and Control Panel
Place the handlebar onto the corresponding grooves
in the main frame, tighten it with bolts and gaskets.
Connect the cords (senor or pulse cord) with the
corresponding slots, and then place the control panel
onto the main frame and tighten.
Sensor Cord
Pulse Cord