background image

Important safety information

1.  Assemble the equipment according to the assembly instructions and only use 

the individual parts enclosed for assembly of the equipment and which are 

assembly, check against the delivery to make sure that everything has been 

delivered and check against the packing list to make sure all parts have been 

enclose.

2.  Read, study and understand the Manual and all the warning labels on this 

product. Furthermore, it is recommended to familiarize yourself and others with 

the proper operation and workout recommendations for this product prior to 

use. Some of the information can be obtained in this Manual, as-well-as from 

your local retailer.

3.  It is recommended that another person assist you with the assembly this unit.

4. 

screws, bolts, nuts and other connections have been done up tightly, to ensure 

that your training equipment is in a safe operation at all time.

Warning: The safety level of the equipment can be maintained 

only if it is examination regularly for damage and wear.

5.  Before beginning any exercise program, you should consult with your doctor. 

It is recommended that you undergo a complete physical examination.

6.  Keep hands, limbs, loose clothing and long hair well out of the way of moving 

parts.

7.  DO NOT place any sharp objects around the machine.

8.  Never operate the machine if it is not functioning properly.

9.  Our product is in compliance with EN ISO 20957-1 and EN957, CLASS HC 

Suitable for domestic, home use only.

10. Note: The braking system of this bike: speed-independent.

11.  Work within you recommended exercise level. DO NOT work to exhaustion. 

If you feel any pain or discomfort, stop your workout immediately.

12. Keep children and pets away from the equipment at all times. DO NOT leave 

unattended children in the same room with the equipment.

13. 

WARNING:

 Pregnant women are not advised to use the machine. 

Please consult your doctor prior to use.

14. 

WARNING:

 Max user’s body weight is 120kg.

15. 

WARNING:

 Remove any object from an area of 0.6mX0.6m around the BIKE 

for safety operation before you start your training work.

16. 

WARNING:

 Use the bike and start your training step by step, because injuries 

to health may result from incorrect or excessive training.

17. Handicapped or disable persons should not use the machine without the 

18. 

WARNING:

DO NOT

 use 

near water or outdoors. The BIKE is designed for home use only. Use the BIKE 

only for its intended use as described in this manual. DO NOT use any other 

accessories not recommended by the manufacturer.

Summary of Contents for 123526

























Reviews: